Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
top
top

Welcome to Lynn

...

University.  Contained on this page is a quick start guide for new employee technology and systems. 


Info
titleIMPORTANT

Follow steps in order below to ensure you have resources needed to complete each step.  Systems access is provided based on your position – you may not need/have access to some systems.


Table of Contents

Table of Contents
maxLevel3
excludeTable of Contents

Step 1

...

: Workday Temporary Username and Password during Pre-Employee Phase

During the pre-employee phase(before your hire date) of the Lynn University hiring process, you would have received two separate automated emails from the Workday system to your personal email address that you provided to Employee Services. 

  • The first email would have contained:
  • The second email would have contained:
    • Your temporary password
  1. After clicking on the Workday website link, there will be two options on the screen to log in.  To log into Workday before your official hire date use the Native Workday Login button on the home page.
  2. Upon the first login, you would have been prompted to set a few challenge response questions
  • These Workday challenge questions are temporary and are only used in the event that you forget your password during the pre-employment phase of the hiring process.
  • Do not confuse these with your account setup password recovery questions that you set in Step 2: Complete Lynn account steps

You'll use the username and password combination and the Native Workday Login button on the home page to log into Workday and upload all the documents necessary for Employee Services to complete the hiring process.

VERY IMPORTANT ** You will continue to use this username and password combination and Native Workday Login option to login into Workday  until 12:00 am on your hire datetemporary

Step 2: Complete Lynn account steps

Overview

As you continue through the hiring process and before your actual hire date you will receive further email communications on how to activate your Lynn account.  Activating your Lynn

Overview

Onboarding your network account means the following:

  1. Set the following password recovery options:  
    • Set 3 security password recovery questions as a password recovery option
    • Set/Confirm your personal email address as a password recovery option
    • Set/Confirm your mobile number as a password recovery optionnumber 
  2. Set your passwordEnable your account

Once you have completed the steps above your Lynn account is enabled and you will be able to use it to log in to Lynn resources with one caveat.  Read below. 

VERY IMPORTANT ** Once you complete the steps below there is one caveat.  You will not be able to use the new username and password to log in to Workday until your hire date, but you can use it to log in to other resources like email, Get Mobile, Zoom etc.

Complete the steps below to

...

activate your

...

Lynn account

  1. Find the Onboarding Lynn Account Setup email (see image below).
    1. This email should have been communicated sent to your personal email address from your hiring manager.  
      1. Check your spam or junk folders just in case you don't see it in your main inbox
      2. Image Removed
        1. It is important to note, your hiring manager is not necessarily your supervisor and your supervisor may need to reach out to your hiring manager to request the email be forwarded to you.
        2. If you don’t see this email in your main inbox, check your spam or junk folders.

        3. Lynn account emailImage Added
    2. Complete these steps to setup your Lynn accountComplete the steps to onboard your network account
        1. Follow the instructions in the account setup email by clicking on the Lynn University
      1. Onboarding Site
        1. Account Setup Link or you can open up any browser and enter https://
      2. onboarding
        1. accountsetup.lynn.edu.  
        2. Please keep the
      3. Onboarding email or information ready
        1. account setup email open, as you will need
      4. it for
        1. the information contained in it to complete the steps below.
      5. Onboarding setup pageImage Removed

        1. setup home screenImage Added


        2. Enter your ID number from the account setup email. It is typically a number from 5 - 8 digits long. Then click ‘Next’
      6. Image Removed

        1.  enter id numberImage Added
        2. Here you will need to enter the
      7. pin code
        1. pincode and username provided in the account setup email.  Then click ‘Next’
      8. Enter pincode and username windowImage Removed

        1. enter pin and usernameImage Added


        2. This page requires you to enter a
      9. required
        1. personal email address and an optional US mobile phone number
      10. in the US
        1. . This information will be stored in our automated password reset system. Then click ‘Next
      11. Password reset windowImage Removed

        1. enter email and phoneImage Added


        2. The next two pages will look very similar and require you to select security questions and provide answers. This information will be stored in our self-service reset password management system (SSRPM) should you need to reset your password in the future. Click ‘Next’ when you have filled out both pages.
      12. Questions and answers windowImage Removed

        1. enter security questionImage Added

        2. This next page allows you to set your account password for the first time. Please make sure to follow the password requirements listed on this page. All of the red X’s must be green check marks for you to be able to successfully set your password and move on to the next step. Then click ‘Change’

      13. Enter new password windowImage Removed
        1. .
          1. It is strongly recommended that users DO NOT write down their password in any location.  Instead, write down the password hint that will help to jog your memory.  You could also writ down some hints for your security question answers which would also allow you to reset your password should it be needed in the future.

            enter passwordImage Added


        1. At this point, you have
    1. now
        1. successfully
    2. Activated
        1. activated your network account and finished the
    3. Onboarding
        1. account setup process. Please remember both your
    4. Username
        1. username and your Lynn
    5. Email Address
        1. Email Address, as these are what you will use to access the myLynn portal and other
    6. online resources
        1. online resources. If you click ‘OK’ you will be taken back to the home page for
    7. Onboarding
        1. account setup. You can close this browser window.
    8. Onboarding completed messageImage Removed

        1. setup completedImage Added

    Return to Top

    Step

    ...

    3: Register

    ...

    three separate

    ...

    methods for

    ...

    multi-factor

    ...

    authentication 

    Overview

    Now that you have completed Step 1: Complete onboarding network Lynn account steps,  there is one more step that you need to do before you can access your email.  In an effort to protect your email and the university's data we have implemented twomulti-factor authentication and require it for all employees who are accessing their Lynn email from off-campus.  Two. Multi-factor authentication is an extra layer of security designed to ensure that you're the only person who can access your account, even if someone else knows your password.

    Before you complete this step, read below:

    • Please wait a full 24 hours from the time that your manager received the onboarding account setup email from Employee Services before you attempt the following steps.   

    Complete the steps below to register, at a minimum, three separate methods for

    ...

    multi-factor authentication 

    This is one of the most important steps.  If you don't do not complete this step, you 'll will not be able to access email, remotelyLynn University resources.  We recommend you register a minimum of three methods in DUO. Duo Push, Cell SMS, and Desk Line methods of authentication. These can include a push notification to your mobile device, an SMS (text message), or a phone call to your mobile, desk, or home phone. If you register only one method, for example, the DUO Push the push notification to the authentication app on your cell phone or your cell phone number for SMS, and you lose or replace your cell phone, you will be locked out of your account.

    If you lose or replace your cell phone, the only way to regain access to your account is to contact IT Support Services.   are locked out of your account, you will need to contact IT Support Services to regain access. IT Support Services is open Monday through Friday between 8:00 AM and 5:00 PM  EST and closed on university observed holidays.

    Click the links Click the link below for more instructions on how to register in DUOfor multi-factor authentication


    Return to Top

    Step

    ...

    4: Important information regarding accessing the resources below

    ...


    Info
    titleImportant information regarding logging in to Canvas.

    There is automation in place that requires at least 24 hours to pass between the time your hiring manager receives your account setup email from Employee Services and you are authorized to access the Lynn University resources listed below.

    Canvas - Important Information!

    Please wait a full 24 hours from the time that your manager received the onboarding account setup email before you try and log in to canvas Canvas with your email address.

    • Adjuncts and faculty will be able to log into Canvas once they complete Step 1: Complete onboarding network Lynn account steps.
    • However, adjuncts and faculty will NOT be assigned any courses in Canvas until Academic Affairs completes their steps.  Typically Academic Affairs assigns the courses within two weeks of the course start date.  
    • If you are an adjunct or a faculty member and you do not see the courses you expect in Canvas and it is two weeks or less before your class start date, please contact Academic Affairs.

    ...

    MyLynn - Important Information!

    • Please wait a full 24 hours from hours from the time that your manager received the onboarding account setup email before you try and log in to myLynn with your network account email address and password. 
    • Your manager will receive the onboarding account setup email directly from Employee Services. 
    • If your manager has not received an onboarding account setup email before your start date, your manager should contact Employee Services. 

    Click Here for more instructions on how to access myLynn

    Workday - Important Information!

    How to log into

    ...

    Workday as a pre-employee (before your official hire date)?

    During the pre-employee phase of the Lynn University hiring process, you would have received two separate automated emails from the workday Workday system to your personal email address that was provided to Employee Services. 

    • The first email would have contained:
    • The second email would have contained:
      • Your temporary password
    1. After clicking on the workday Workday website link, there will be two options on the screen to log in.  Pre-Employees (an employee that is logging into workday before their To log into Workday before your official hire date ) will use the Native Workday Login button on the home page.
    2. Upon the first login, you would have been prompted to set a few challenge response questions
    • These workday Workday challenge questions are temporary and are only used in the event that you forget your password during the pre-employee employment phase of the hiring process.
    • Do not confuse these with your onboarding account setup password recovery questions that you set in in Step 1: Complete onboarding network account Lynn account steps

    You'll use the username and password combination and the Native Workday Login button on the home page to log into workday to Workday and upload all the documents necessary for Employee Services and to complete the hiring process. You will continue to use this username and password combination and option to login into workday Workday until your hire date.   

    How to log into

    ...

    Workday as an employee (on or after your official hire date)

    On your hire date or after your hire date your workday Workday username, your workday Workday password, and the button that you click to log in on the home page all change.  Read on below for more details.

    • You will use the Lynn Account option on the Workday Login Page https://wd5.myworkday.com/lynn/login.htmld
    • You will use your Lynn email address as the username. i.e.  jdoe@lynn.edu
    • You will use the password that you set in Step 1 Complete onboarding network account 1: Complete Lynn account steps 


    Return to Top

    Step

    ...

    5: Helpful information for the most common resources

    Workday Training

    Please reference this link for all Workday training resources:  Workday Documentation

    Return to Top

    Safe Colleges (Compliance Training)

    An invite email will be sent with a link to the available trainings for you. Or please use the following link to access Employee Compliance Trainings: https://lynn-fl.safecolleges.com/

    Note:  For student employees, please make sure to log in with your Lynn PSW account in order to access the trainings.

    Follow the instructions to complete each training course as needed.

    Return to Top

    Requesting Additional Resources (Applications, Hardware, Equipment)

    To request additional resources and access, please put in a ticket in the LU Service Center, or contact IT Support Services at 561-237-7979.

    Note:  Supervisor approval may be needed for specific requests; Vice President approval may be needed for specific requests.

    Return to Top

    GET Mobile

    Include Page
    GET Mobile Instructions
    GET Mobile Instructions

    Return to Top

    Lynn University Knowledge Base 

    Include Page
    Lynn University Knowledge Base
    Lynn University Knowledge Base

    Return to Top

    Office 365 FAQs

    Include Page
    Office 365 FAQs
    Office 365 FAQs

    Return to Top


    Reporting Suspicious Emails 

    Include Page
    Report Suspicious Email
    Report Suspicious Email

    Return to Top

    Lynn University Services Center FAQs

    Include Page
    Lynn University Services Center
    Lynn University Services Center

    Return to Top

    Zoom

    Include Page
    Zoom FAQs
    Zoom FAQs

    Return to Top

    Remote Working Resources

    Return to Top

    Campus Resources and Contacts

    • Facilities - For any facilities-related issues or questions, please put in a ticket in the Maintenance Work Order system, or you may contact the Facilities department at 561-237-7030.
    • Information Technology - For any IT-related issues or questions, please put in a ticket in the LU Service Center, or contact IT Support Services at 561-237-7979.
    • Canvas - For any Canvas-related issues or questions, please email canvas@lynn.edu or contact our Instructional Design team at 561-237-7979.
    • Slate - For any Slate-related issues or questions, please contact Lori Kukuck in the Office of Admission, at lkukuck@lynn.edu or by phone at 561-237-7250.
    • Navigate - For any Navigate-related issues or questions, please contact Lori Kukuck in the Office of Admission, at lkukuck@lynn.edu or by phone at 561-237-7250.

    Additional resources available to Lynn University Employees and how to access/use them

    • Mango Languages

      • Mango Languages is an online language learning resource application/service offered by the Lynn library.

      • Please perform the following steps below to log in to Mango…

    • Grammarly

      • Grammarly is an online writing assistance tool offered by the Lynn Library
      • Please perform the following steps below to log in to Grammarly…
        • Navigate to this link https://www.grammarly.com/enterprise/signup
        • If you already have an account, log in using your email address and password.

          • If you have not created a Grammarly account yet, enter your information and click on the 'Sign Up' button.

          • The system will send you an email.  Open the email and click "Verify Email".
    • Adobe Creative Cloud

      • Adobe Creative Cloud is a suite of applications for multi-media content creation.
      • If you need access for business purposes, please contact your supervisor and have them initiate a request for you to be granted access to Adobe Creative Cloud.
    • Perkspot

      • Perkspot is an online discount program for Lynn employees.
      • Please perform the following steps to log in to Perkspot
        • Navigate to this link https://lynn.perkspot.com/login
        • If you already have an account, log in using your email address and password

          • If you have not created a Perkspot account yet, click the "Create Your Account" button.

          • Enter all information and click "Register".
    • Onthehub

      • Onthehub offers free and discounted software to Lynn Employees.
      • Please perform the following steps to log in to Onthehub
        • Navigate to this link https://lynn.onthehub.com
        • Select the software you would like and follow the instructions to purchase and download.
    • Flipster

      • Flipster allows Lynn University students, staff and faculty access to the Lynn Library digital magazine subscription service. The service allows access from any computer, laptop, or mobile device, as long as it is connected to the Internet.
      • Please perform the following steps to log in to Flipster
      • Navigate to this link https://lynn.onecampus.com/task/all/flipsterlynn
        • Log in using your network email address and password.
    • Global Protect Virtual Private Network (VPN)

    Return to Top

    Info

    Content by Label
    showLabelsfalse
    spacesITKBH
    showSpacefalse
    sortmodified
    reversetrue
    typepage
    cqllabel in ("mylynn","login","onboarding","zoom","office365") and type = "page" and space = "ITKBH"
    labelsmyLynn login onboarding

    ...